Plasma Endo Plazen RCT®

Seongmo Dental Clinic (Sungshin Women’s University) — Plasma Root Canal Treatment (Plazen RCT®)

A more comfortable, faster, and more reliable chance to save your tooth

Root canal treatment free from pain and time —
available at only about 400 clinics nationwide

Root canal treatment is often cited as one of the most difficult and burdensome dental procedures. Many patients delay treatment because of the multiple visits, pain, and anxiety involved. To resolve these concerns, Seongmo Dental Clinic introduced the state-of-the-art Plasma Endo Plazen RCT®, released in May 2023. Located near Sungshin Women’s University Station, Seongmo Dental Clinic operates the Plasma Endo Plazen RCT® device to relieve root canal pain and quantitatively secure treatment success through a high-speed sterilization process lasting around one minute.

Seongmo Dental Clinic Plazen plasma root canal device, Sungshin Women's University area, Seongbuk-gu

Plasma Endo core technology

Overwhelming sterilization power and precision (aqueous plasma & reactive oxygen species)+

Plazen fills the root canal with water and inserts a special tip to generate a plasma discharge. The resulting reactive oxygen species (ROS) use powerful oxidation to chemically break down and destroy bacteria and biofilm in micro-crevices and lateral canals that mechanical files cannot reach. It even removes causes of reinfection that were difficult to address with conventional disinfectants (NaOCl).

Dramatically shorter treatment time and duration+

Conventional root canal treatment required 15 minutes or more per visit just for disinfection, but Plazen achieves complete sterilization with just about one minute of focused care. When clinically indicated, Seongmo Dental Clinic applies same-day canal filling (one-day endo) to minimize the number of patient visits to just one.

Minimized post-treatment pain and a comfortable recovery+

Because bacteria and necrotic tissue inside the canal are removed almost completely, the “debris” pushed beyond the root tip that causes inflammation is minimized. You can expect a much more comfortable recovery than with conventional methods.

Higher success rates for retreatment and difficult cases+

For cases where pain returns after a previous root canal treatment, or other difficult-to-treat cases, Seongmo Dental Clinic uses reactive oxygen species (ROS) to precisely target E. faecalis bacteria, lowering the recurrence rate of previously failed treatments and securing a higher success rate.

Maximized preservation of natural teeth (minimized mechanical enlargement)+

Because plasma handles cleaning and sterilization, mechanical removal (enlargement) of the canal with files can be minimized. This lowers the risk of the tooth wall thinning and fracturing, extending the tooth’s lifespan and helping preserve your natural tooth in a stronger state.

Plasma Endo Plazen is a premium, state-of-the-art device costing roughly 38 million KRW, representing an innovative technology that points to the future of restorative dental care. To more successfully offer patients this last chance to save their precious natural teeth, Seongmo Dental Clinic provides this advanced treatment at the standard national health insurance root canal fee, with no additional cost.

Experience next-generation root canal treatment at Seongmo Dental Clinic — faster, cleaner, and more comfortable, protecting your teeth.

See details → Plasma Endo Plazen RCT®

Primescan

The next-generation 3D intraoral scanner near Sungshin Women’s University

Every difference in the final result starts with a perfect “source” — the original data.

To create precise prosthetics, obtaining the most accurate “original” data from the very start is essential. That is why we insist on the Primescan, a premium device costing roughly 30 million KRW. Far more than a replacement for rubber impressions, it is a core technology that maximizes precision, speed, and patient satisfaction throughout the entire treatment process.

Seongmo Dental Clinic Primescan 3D intraoral scanner

3D intraoral scanner core technology

Overwhelming precision+

High-resolution scanning that captures several million data points per second faithfully reproduces even invisible micro-contours, producing prosthetics with virtually no margin of error. This minimizes the prosthetic’s seam, lowering the likelihood of secondary decay.

Unmatched comfort+

Time spent in the mouth is short, and there is no unpleasant, gag-inducing rubber impression process, so you can receive treatment comfortably and without trauma.

Transparent care you can see for yourself+

We review the scanned 3D image together with you during diagnosis, increasing your understanding of and confidence in the treatment plan.

A comfortable start, a precise process, and a satisfying result.
Primescan is Seongmo Dental Clinic’s promise that makes all of this possible.

See details → Primescan

EMS Prophylaxis Master

The only EMS Airflow powder scaling system in Seongbuk-gu

We turn every uncomfortable memory of scaling into comfort.

To break the assumption that “scaling is inherently painful and uncomfortable,” we offer a completely new approach to gum care. Switzerland’s EMS Prophylaxis Master is an innovative system created to scientifically resolve every drawback of conventional scaling — pain, noise, sensitivity, and irritation. Through the organic interplay of four core functions, scaling and gum treatment become refreshing, comfortable care rather than a painful ordeal.

Seongmo Dental Clinic EMS Prophylaxis Master powder scaling system

EMS Prophylaxis Master core technology

Warm-water system — cutting off the source of sensitivity pain+

All treatment uses water warmed to around 37°C, close to body temperature, preventing the sharp, sensitive discomfort caused by cold water and providing a comfortable experience.

PIEZON® NO PAIN — intelligent tartar removal+

Smart technology responds powerfully to hard tartar and delicately to soft plaque or clean tooth surfaces, removing only the tartar that needs to be removed with minimal pain and no damage to healthy tooth structure.

PERIOFLOW® — care deep beneath the gumline+

This is on a different level from the conventional method of scraping beneath the gums with sharp hand instruments. PERIOFLOW sprays a fine powder through a soft, specialized nozzle, thoroughly cleaning deep periodontal pockets and hard-to-reach areas around implants.

AIRFLOW® — irritation-free surface cleansing+

A soft, fine powder removes deep staining that conventional scalers could not reach, without damaging the tooth surface — restoring your teeth’s original bright, clean color, as if you had a whitening treatment.

EMS Prophylaxis Master is Seongmo Dental Clinic’s commitment to turning scaling and gum care from something to endure into a refreshing, comfortable experience.

See details → EMS Prophylaxis Master

Q-ray

The quantitative light-induced fluorescence system near Sungshin Women’s University

We prove problems you couldn’t see before, in red light.

To detect problems that are hard to find with the naked eye or X-rays, we introduced the Q-ray system (QRaycam Pro, QRay Pen, QScan Plus), which uses specialized fluorescence analysis technology. When a blue light harmless to the human body is shone on a tooth, problem areas glow red, showing the hidden cause directly to the patient.

Seongmo Dental Clinic Q-ray quantitative light-induced fluorescence system

Q-ray core technology

Early detection of incipient cavities+

Even painless, invisible incipient cavities that other clinics might easily miss are clearly identified in red light, demonstrating the real difference true diagnostic skill makes.

Diagnosis of hidden secondary decay+

It can detect secondary decay progressing hidden beneath existing restorations (crowns, inlays) or at resin margins.

Detection of microscopic cracks+

It visually shows microscopic tooth cracks — often the culprit behind unexplained pain — along with surrounding bacterial activity, enabling diagnosis based on accurate data rather than guesswork.

Detection of inflammation around gums and implants+

It detects inflammation hidden deep in the gums or around implants using red fluorescence, enabling early diagnosis of periodontal disease and peri-implantitis and scientific monitoring of treatment progress.

Transparent care you review together with your patient+

Because we explain problem areas shown in red together with you on the monitor, you can directly understand and agree with the need for treatment. This forms the basis of honest diagnosis and trust, without overtreatment.

The Q-ray system, which finds problems that would otherwise go unseen, is Seongmo Dental Clinic’s core commitment to honest diagnosis without overtreatment and transparent communication with patients.

See details → Q-ray

Quicksleeper

Computer-controlled intraosseous anesthesia near Sungshin Women’s University

“I struggled because the anesthesia didn’t work” — an experience you won’t have at Seongmo Dental Clinic.

Fear of anesthetic injections, and the painful experience of treatment when anesthesia doesn’t take properly, are among the biggest causes of dental trauma. To fundamentally resolve this problem, Seongmo Dental Clinic introduced Quicksleeper, a premium intraosseous anesthesia device that requires skilled technique and know-how. It is an entirely different tier of anesthesia system, found at only a small number of clinics.

Seongmo Dental Clinic Quicksleeper intraosseous anesthesia device

Quicksleeper core technology

Comfort so complete, you may not even notice the injection+

A computer-controlled automatic pressure system injects anesthetic at an extremely gentle and consistent rate. This scientific control eliminates the pressure-related pain of injection at its source, and many patients don’t even notice the moment anesthesia begins.

Immediate anesthesia, with no waiting+

Because the anesthetic is injected directly into the cancellous bone near the nerve, the effect appears almost immediately, without the usual 5–10 minute wait. This reduces patient anxiety and shortens overall treatment time.

Reliable anesthesia even in difficult cases+

It delivers stable anesthetic effect even in difficult cases where conventional anesthesia often fails — such as dense cancellous bone near the lower front teeth, thick cortical bone near the lower molars, or areas with severe inflammation.

Eliminating unnecessary discomfort+

Because only the tooth being treated is precisely anesthetized, we eliminate the discomfort of the lips, tongue, or cheek staying numb for hours after treatment.

Not every clinic can offer this, since it requires expensive equipment and skilled technique — but we believe that if there is a way to reduce a patient’s fear, choosing it is simply the right thing to do.
Quicksleeper is Seongmo Dental Clinic’s firm commitment to patient-centered care.

See details → Quicksleeper

i-ject

The computer-controlled painless anesthesia system near Sungshin Women’s University

“Are you sure that was an injection?” — to us, that’s the highest compliment.

To scientifically control injection pain — the biggest cause of dental anxiety — Seongmo Dental Clinic uses the i-ject computer-controlled painless anesthesia system. i-ject is an advanced technology that does more than simply reduce injection pain; it transforms your entire anesthesia experience into something comfortable.

Seongmo Dental Clinic i-ject computer-controlled painless anesthesia system

i-ject core technology

Optimal anesthesia delivered in the most comfortable way+

Whichever technique is used — periodontal ligament injection, infiltration, or block anesthesia — you will experience the most comfortable anesthesia possible, without worrying about pain.

Applicable to every anesthesia technique+

From infiltration anesthesia for simple procedures to block anesthesia numbing the entire lower jaw, any type of anesthesia can be delivered comfortably, without pressure-related pain.

Precisely anesthetizes only the treatment area, minimizing post-treatment numbness+

i-ject’s precise control technology makes the highly demanding “periodontal ligament anesthesia” possible — anesthetizing only the single tooth being treated. You can return to daily life immediately after treatment, without the discomfort of a numb lip, cheek, or tongue.

See details → i-ject

Phrozen Sonic CS+ · 3D printer

3D printer — Phrozen Sonic CS+

In-house digital 3D printing near Sungshin Women’s University

From temporary crowns to TMJ appliances, we print the device that’s right for you, in-house.

Based on precise data captured with our 3D scanner, we fabricate surgical guides, temporary crowns, TMJ splints, custom trays, and more — all designed on computer and manufactured in-house. This eliminates the delays and errors of outsourcing to an external dental lab, and is one of our core technologies for delivering a far more precise, comfortable treatment process.Seongmo Dental Clinic operates three pieces of equipment together: the Phrozen Sonic CS+ dental LCD photopolymer 3D printer, along with its dedicated wash unit (Wash+) and post-curing unit (Cure+). By handling printing → washing → post-curing entirely in-house, we ensure stable strength and surface finish for any appliance placed in the mouth.

Seongmo Dental Clinic in-house 3D printing equipment

3D printer core technology

Temporary crown fabrication+

Esthetics shouldn’t be sacrificed even during treatment. Without the hassle of taking an impression and sending it to a lab and waiting, we scan in 3D and immediately print a precise, well-fitted temporary crown matched to your tooth shape, in-house.

In-house custom TMJ splint fabrication+

We don’t tolerate even minor occlusal error. We fabricate not only TMJ stabilization splints but also anterior repositioning splints (ARS) needed for advanced TMJ treatment — entirely in-house.

Custom impression trays for precise denture fitting+

We analyze each patient’s unique gum shape and jawbone condition in 3D to fabricate a custom impression tray made for that patient alone. This step is essential to producing a snug, comfortable denture that doesn’t feel loose.

Implant surgical guides+

We translate the results of the simulated surgery directly into the guide. By printing a surgical guide that precisely directs implant position, angle, and depth to within 0.1mm, we eliminate the risk of nerve damage and dramatically shorten surgery time — realizing “navigation surgery.”

In-house mouthguard fabrication+

We fabricate mouthguards in-house to protect teeth from bruxism (teeth grinding/clenching) and sports-related damage, custom-shaped to fit your teeth exactly.

In-house snoring appliance (sleep apnea oral appliance) fabrication+

Oral appliances (MAD) that improve snoring and sleep apnea are also fabricated in-house, right on the spot. We quickly and accurately complete a custom appliance that repositions the lower jaw to widen the airway, without any outside lab involved.

From scanned data to a real object, on the spot.
Seongmo Dental Clinic handles the entire in-house 3D printing process directly, using the Phrozen Sonic CS+, the Wash+ washing unit, and the Cure+ curing unit.

See details → 3D Printer

ACTILINK

Plasma surface-activation system for implants and prosthetics near Sungshin Women’s University

We awaken the full potential of every material to raise the quality of treatment.

Successful restorative and prosthetic treatment depends on artificial materials functioning as naturally as part of your own body. Immediately before a procedure, ACTILINK uses plasma energy to activate the surface of every core material used in treatment — implants, prosthetics, bone graft material — putting them in optimal condition. It is an integrated solution that raises the overall quality of treatment to a new level.

Seongmo Dental Clinic ACTILINK plasma surface activation system

ACTILINK core technology

Implant fixtures+

Surface activation creates an optimal hydrophilic state where blood doesn’t bead up but adheres firmly. This promotes faster, stronger bonding between bone and implant (osseointegration), shortening treatment time and improving long-term success rates.

Bone graft material+

Maximizing the hydrophilicity of bone graft material lets it absorb blood and growth factors like a sponge. This improves the stability of the graft material and promotes new bone formation, producing a firmer, more predictable result.

Membranes+

Activating the membrane surface helps it bond with gum tissue early and settle stably in place. This supports faster gum healing and helps secure the space needed for the bone graft material to remain stable.

Abutments+

Activating the abutment surface promotes better attachment of gum cells (fibroblasts). This forms a dense, healthy gum barrier around the abutment, playing a decisive role in blocking external bacterial invasion and maintaining long-term gum health.

Various prosthetics (zirconia, E-max, hybrid inlays, etc.)+

Activating the surface of various prosthetics — zirconia, E-max (lithium disilicate), hybrid inlays, and more — maximizes bonding strength. This reduces the likelihood of prosthetic detachment or micro-leakage.

Bonding powerfully with bone, wrapped healthily by gum tissue, and adhering seamlessly as a prosthetic. When every material performs at its best, the long-term success rate of treatment rises.

See details → ACTILINK

EXPlasma Z7

10-minute ultra-fast, low-temperature plasma sterilization system near Sungshin Women’s University

Low-temperature sterilization with no heat damage,
uncompromising 10-minute ultra-fast sterilization.

Expensive precision instruments used in implant surgery or root canal treatment can become dull or subtly deformed with repeated exposure to high heat, potentially lowering the quality of care. To prevent this, Seongmo Dental Clinic uses an advanced low-temperature plasma sterilization system. It preserves the sharpness and precision of instruments at their best, with no heat damage, enabling more refined surgery. Its overwhelming speed — completing sterilization in just 10 minutes — also upholds a strict standard of complete sterilization even in a busy clinical environment.

Seongmo Dental Clinic EXPlasma Z7 low-temperature plasma sterilizer

EXPlasma Z7 core technology

Complete sterilization of all heat-sensitive equipment+

It perfectly sterilizes, without deformation or damage, delicate heat-sensitive instruments that could be damaged or have their lifespan shortened in a high-temperature, high-pressure autoclave — such as handpieces, scanner tips, plastic surgical guides, rubber impression material, and precision torque wrenches.

Maintaining the highest quality of care+

Preventing instrument wear or deformation keeps every instrument in like-new condition, which directly translates into the accuracy and quality of treatment.

Rapid sterilization keeps us fully prepared at all times+

An autoclave takes about 30–60 minutes, but the plasma sterilizer completes sterilization in just 10 minutes. We promise every patient equally safe care, without ever compromising by using alcohol disinfection as a shortcut.

There’s no excuse to compromise, whether because we’re busy or because an instrument might be damaged. This is Seongmo Dental Clinic’s firm investment in upholding “complete sterilization” under every circumstance.

See details → EXPlasma Z7

HDX Dentri

3D CT precision diagnostic system for implant treatment near Sungshin Women’s University

Successful treatment begins with how accurately you diagnose. To raise our diagnostic standard to a new level, Seongmo Dental Clinic analyzes every possibility in three dimensions using a low-dose, premium 3D CT unit. This is no longer optional — it is a prerequisite for high-quality care.

Seongmo Dental Clinic HDX Dentri 3D CT precision diagnostic system

HDX Dentri core technology

Identifying the true cause of hidden pain+

It accurately detects microscopic cracks, apical inflammation, additional canals, and other issues invisible on 2D X-ray, clearly diagnosing and resolving the real cause behind pain that was previously “unexplained.”

Improving precision in every type of surgery+

For implants, wisdom tooth extraction, apicoectomy, sinus surgery, and every other surgical procedure, it captures anatomical structures three-dimensionally, minimizing the risk of complications by identifying the location of critical nerve canals in advance.

Maximizing the quality of restorative treatment+

For root canal treatment of teeth with complex canal anatomy, 3D CT serves as the doctor’s “eyes” into areas otherwise invisible. This raises the quality of treatment and improves the odds of saving your precious natural tooth.

Transparent communication and trust+

We review the 3D images together with you, directly confirming and explaining the nature of the problem. This improves your understanding of the treatment and enables transparent care, free from overtreatment.

Only accurate diagnosis can prevent overtreatment and make truly necessary treatment possible. 3D CT reflects Seongmo Dental Clinic’s firm commitment to providing patients with the best and most conscientious care.

See details → HDX Dentri

Osstem Beautis Light

A premium whitening lamp system delivering up to 2,200mW/cm² near Sungshin Women’s University

We turn a disappointing at-home whitening experience into a satisfying one.

Have you tried a popular at-home whitening product but been disappointed that it didn’t deliver the results you expected? That’s due to the inherent limitations of a consumer product, as opposed to actual medical equipment. Seongmo Dental Clinic promises professional whitening that goes beyond that limitation.

Seongmo Dental Clinic Osstem Beautis Light whitening system

Osstem Beautis Light core technology

An overwhelming difference in output (light intensity)+

Whitening effectiveness is directly proportional to light intensity. Unlike an at-home necklace-type whitening device (estimated at roughly 50–100mW/cm²), our professional-grade unit delivers up to 2,200mW/cm² of high-power energy, dramatically accelerating the whitening gel’s reaction for dramatic results that simply aren’t possible at home.

A wavelength optimized for whitening+

This isn’t a simple blue LED. Our device is a precisely engineered “therapeutic light” tuned to the optimal wavelength range (430–490nm) at which whitening gel reacts most effectively. This minimizes unnecessary heat and irritation while maximizing whitening effectiveness alone.

A patient-customized “two-track” system+

High-power stand type: with up to 2,200mW/cm² of powerful energy, it dramatically accelerates the whitening gel’s chemical reaction, providing the fastest, most effective solution for patients aiming for dramatic results that are hard to achieve at home.Low-irritation necklace type: a considerate solution for patients concerned about sensitivity or sensitive teeth. It delivers reliable, professional-grade results with up to 600mW/cm² of output, while minimizing irritation.

No more disappointing results.
Experience the clear difference that true professional whitening makes.

See details → Osstem Beautis Light

Electric Motor

A premium electric-motor system found in fewer than 5% of clinics in Korea

The technology that perfects the doctor’s touch — and makes the difference in the result

Did you think every dental visit is the same? The speed and safety of treatment, and the precision of the result, are determined by the quality of equipment behind the doctor’s hands. We have fitted a premium electric-motor system — found in fewer than 5% of clinics in Korea — on every treatment chair. This reflects Seongmo Dental Clinic’s firm commitment to delivering treatment that is overwhelmingly faster, safer, and more precise than anything you may have experienced before.

Seongmo Dental Clinic premium electric-motor handpiece system

Electric motor core technology — how is it different from an air turbine?

Overwhelming power and speed: a dramatic reduction in treatment time+

Unlike a conventional air turbine, an electric motor maintains consistent, strong power even against hard prosthetic material, without losing torque. This shortens the time to remove an old zirconia prosthetic from over 10 minutes to under 1 minute, and makes routine cavity treatment faster and smoother, dramatically reducing patient stress and fatigue.

Unmatched comfort and safety+

Instead of the sharp, high-pitched noise typical of an air turbine, a much quieter, smoother operating sound greatly reduces auditory stress and anxiety. It also generates significantly less vibration, and consistent rotation speed suppresses heat generation, minimizing stress on the tooth and surrounding tissue.

Ultra-precise, situational control of power and speed+

High-speed mode: shortens treatment time with powerful force when removing prosthetics or rapidly reducing tooth structure.Low-speed mode: for delicate work such as refining the margins of resin or prosthetics, an extremely low speed enables a delicate, precise approach for a superior finish. Low-speed mode is also used for safety when working near nerves during procedures such as wisdom tooth extraction.

Fast, precise, and safe — realizing all three values at once, the electric motor demonstrates Seongmo Dental Clinic’s firm clinical philosophy: never compromise on either your experience or your treatment outcome.

See details → Electric Motor

Dentis Luvis-S300

Surgical light near Sungshin Women’s University

The science of light that perfects clinical precision

The success of precision surgery depends on how accurately the doctor can see and judge. Seongmo Dental Clinic uses the Dentis Luvis-S300 surgical light, which completely eliminates even the faint shadows cast by the doctor’s hands or instruments, building a surgical environment that allows for zero margin of error.

Seongmo Dental Clinic Dentis Luvis-S300 shadowless surgical light

Surgical light core features

A perfectly shadow-free field of view+

LED light sources from multiple angles cross-illuminate the field, securing a clean, clear view free of shadows in any situation and maximizing treatment precision.

Near-natural color rendering (CRI 95+)+

Light nearly identical to natural daylight (CRI 95 or higher) reveals subtle changes in gum color or signs of inflammation without distortion, improving diagnostic accuracy and preventing potential risks in advance.

Comfort for the patient+

With virtually no heat generation, it stays comfortable even during long procedures, and its specialized design minimizes glare for the patient, providing a comfortable environment.

Controls optimized for every procedure+

A touchscreen allows precise adjustment of brightness and color temperature, and the light can be positioned at the optimal angle for the surgical site, elevating the quality of every procedure from implants to root canal treatment to cosmetic dentistry.

If you can’t see it clearly, you can’t treat it perfectly.
The clearest, most accurate field of view delivers flawless, superior results.

See details → Dentis Luvis-S300

T-scan

Digital occlusal analysis system near Sungshin Women’s University

An occlusal imbalance invisible to the eye,
captured accurately with data down to 0.003 seconds.

Occlusion refers to how your upper and lower teeth meet. Even a very slight occlusal imbalance can cause tooth fracture, TMJ disorders, implant failure, or prosthetic detachment. Previously, occlusion could only be checked with articulating paper (thin carbon film), making it difficult to know exactly which tooth bears how much force, when, and in what sequence.The T-scan digital occlusal analysis system that Seongmo Dental Clinic has introduced measures and visualizes occlusal force, timing, and per-tooth load in real time, down to 0.003-second increments. It captures occlusal problems that were previously invisible, using data, and resolves them scientifically.

Seongmo Dental Clinic T-scan digital occlusal analysis system

T-scan core technology

Real-time occlusal force and timing analysis+

It measures in real time, down to 0.003-second increments, which tooth makes contact first and how much force it bears. It visualizes the timing sequence and force distribution — information that articulating paper simply cannot reveal — as a color graph, enabling precise diagnosis.

Precise occlusal adjustment for implants and prosthetics+

Occlusal adjustment after fitting an implant or crown/inlay prosthetic is key to treatment success. T-scan checks excessive occlusal load in numerical terms while making precise adjustments, preventing prosthetic fracture, detachment, and peri-implantitis.

Improved precision for TMJ treatment+

It precisely identifies occlusal imbalance — one cause of TMJ disorder — and provides objective, data-based grounds for splint fabrication and adjustment. You can compare before-and-after data numerically to see the improvement together with your doctor.

Minimizing tooth reduction and occlusal adjustment+

It guides adjustment to only the areas that truly need it, minimizing unnecessary removal of precious tooth structure.

Diagnosing bruxism (teeth grinding/clenching)+

It analyzes the pattern of occlusal overload caused by grinding or clenching habits using data, providing an objective basis for deciding on a night guard prescription or Botox treatment.

Transparent occlusal care you review together with your patient+

We review the occlusal analysis results together with you on the monitor and explain them. You can directly understand the need for treatment through data rather than a “feeling,” enabling transparent, trustworthy care.

Occlusion is both the starting point and the finishing touch of every dental treatment.
Seongmo Dental Clinic in Seongbuk-gu resolves occlusal problems that would otherwise remain invisible, using T-scan digital occlusal analysis data, improving the long-term success rate of implant, prosthetic, and TMJ treatment.

See details → T-scan

VITA Easyshade® V

Digital tooth shade measurement system near Sungshin Women’s University

The era of matching shade by eye is over.
Now accurate, down to 0.01 increments of spectrophotometric data.

Matching tooth color for prosthetics, veneers, or whitening treatment is far more difficult than it seems. The same tooth can look different depending on the clinic’s lighting, the doctor’s eye condition, and the patient’s hydration level. For a long time, dentistry relied on visually comparing a physical shade guide.The VITA Easyshade® V digital spectrophotometer that Seongmo Dental Clinic has introduced measures tooth shade with a precision sensor rather than the human eye. It provides objective, reproducible shade data that is consistent regardless of lighting conditions or who takes the measurement. This data is transmitted directly to the dental lab as digital values, leading to far more accurate prosthetic fabrication.

Seongmo Dental Clinic VITA Easyshade V digital shade measurement system

VITA Easyshade® V core technology

Precision spectrophotometric measurement — a sensor instead of an eye+

VITA Easyshade® V is equipped with a spectrophotometer that analyzes the entire visible light spectrum. It precisely quantifies even subtle differences in value, chroma, and hue that are hard for the human eye to distinguish, displaying results in both the VITA Classical A1–D4 and VITA SYSTEM 3D-MASTER shade systems.

Improved shade-matching accuracy for prosthetics and veneers+

For crowns, inlays, veneers, and every other prosthetic, measured data is sent to the dental lab. Because the technician works from numerical data instead of a visual record, the finished prosthetic blends far more naturally with your natural teeth. This reduces the frequency of remakes, saving treatment time and cost.

Objective before-and-after comparison for teeth whitening+

It quantifies tooth shade before and after professional whitening treatment using the same standard for comparison. We can clearly show you “how many shades brighter” your teeth became with data instead of a guess, letting you objectively confirm the whitening result and reasonably decide on further treatment.

Consistent results unaffected by lighting conditions+

Whether measured under fluorescent light, natural light, or LED light, the result is the same. We obtain reproducible, consistent shade data regardless of time of day, weather, or the doctor’s condition.

Transparent shade consultation you review together with your patient+

You can view the measurement result directly on screen, so we discuss your current tooth shade and target shade together with you, using data. Sharing “how bright you’d like your teeth to be” numerically aligns expectations and leads to a more satisfying esthetic result.

A single shade measurement changes the outcome of a prosthetic remake, and a single whitening record changes how much you can trust the treatment.
Seongmo Dental Clinic in Seongbuk-gu backs every step of esthetic treatment with data, using the VITA Easyshade® V.

See details → VITA Easyshade® V

CEREC Primemill

Seongmo Dental Clinic (Sungshin Women’s University) — Primemill (CEREC Primemill) Chairside Milling

From scan to seating — we mill your prosthetic in-house

The process that once meant taking an impression, sending it to a lab, and waiting two weeks
is now: scan → design → mill → same-day seating.

Seongmo Dental Clinic has introduced the Dentsply Sirona Primemill (CEREC Primemill) in-house, milling ceramic and zirconia blocks directly from data scanned with the Primescan. A zirconia crown is processed in about 5 minutes in Superfast mode, and combined with SpeedFire sintering, same-day prosthetics are possible when clinically indicated.

Seongmo Dental Clinic CEREC Primemill chairside milling unit

Primemill core technology

Milling and grinding in one — compatible with every material+

It handles both milling hard zirconia and grinding glass ceramics on a single unit. It processes zirconia, lithium disilicate, hybrid ceramics, and nearly every other chairside block, allowing us to freely select the right material for each case.

Same-day prosthetics — a shorter temporary-crown period+

Scanning, design, milling, and sintering are processed continuously in-house, so when indications are met, we fabricate and seat a crown, inlay, or endocrown the very same day.

Precise margin fit+

Because it mills directly from high-precision scan data, the prosthetic’s margin fit is excellent, favorably reducing the risk of secondary decay caused by bacteria penetrating through a gap.

Primemill is not just a milling unit —
it is the heart of an in-house digital prosthetic system that completes everything from scan to seating in a single day.

See details → CEREC Primemill

Dentsply Sirona SpeedFire

Seongmo Dental Clinic (Sungshin Women’s University) — SpeedFire Ultra-Fast Sintering

From milled prosthetic to in-house sintering and glazing

Zirconia prosthetics need to be fired after milling.
We’ve cut that process down to about 30 minutes.

Zirconia prosthetics must be sintered at high temperature after milling to reach their final strength and color. Seongmo Dental Clinic keeps the SpeedFire in-house, sintering a single prosthetic in about 30 minutes and integrating sintering and glazing into one process, connecting Primemill milling → sintering → same-day seating.

Seongmo Dental Clinic SpeedFire ultra-fast sintering furnace

SpeedFire core technology

About 30-minute sintering for a single prosthetic+

It dramatically shortens a process that conventional sintering furnaces required several hours for, resolving the final bottleneck to same-day prosthetics.

Integrated sintering and glazing+

It applies the surface-glazing step together after sintering, reducing the number of steps and helping create a smooth surface that resists staining and bacterial adhesion.

Immediately shorter temporary-crown period+

It reduces the two-week wait typically spent wearing a temporary crown, lowering gum irritation and the burden of repeat visits.

Same-day prosthetics require both a milling unit and a sintering unit working together.
Seongmo Dental Clinic operates Primemill and SpeedFire together, in-house.

See details → SpeedFire

MediHub i-JECT B

Seongmo Dental Clinic (Sungshin Women’s University) — Digital Quantitative Botox Injection (i-JECT B)

0.05cc automatic dosing reduces left–right variation

The Botox result isn’t determined by the drug itself, but by exactly how much was injected, and where.

Seongmo Dental Clinic uses the i-JECT B digital quantitative injection device. It automatically doses in 0.05cc increments, minimizing left–right variation, and manages injection volume in a recordable, reproducible way for Botox treatment of the masseter (jaw-slimming) and temporalis muscles related to bruxism (teeth grinding/clenching).

Seongmo Dental Clinic i-JECT B digital quantitative Botox injection device

i-JECT B core technology

0.05cc automatic quantitative injection+

Dosing that once depended on manual feel is now precisely controlled by the device, keeping the dose consistent across each area.

Minimized left–right variation+

Injecting the same dose evenly on both sides reduces the risk of asymmetry and lets us reproduce the same conditions in the next session.

Treatment for bruxism, jaw slimming, and the temporalis muscle+

Together with the occlusal overload pattern identified through T-scan digital occlusal analysis, we select overactive muscle areas to build the treatment plan.

Predictable results for your next session require both precise dosing and careful records.
Seongmo Dental Clinic plans Botox treatment together with occlusal data.

See details → i-JECT B

5-Axis Wet Milling

Seongmo Dental Clinic (Sungshin Women’s University) — 5-Axis Wet Milling Machine

Not outsourced to a lab — the treating doctor designs, mills, and seats it personally

Instead of relying on an outside lab, the doctor who treats you takes responsibility from design to seating.

Seongmo Dental Clinic keeps a 5-axis wet milling machine in-house, with the doctor personally designing and milling the prosthetic and seating it on the spot. The 5-axis simultaneous control method allows the tool to reach angled surfaces and undercuts, fabricating a wide range of prosthetics in-house — crowns, inlays, and veneers, as well as bridges, custom implant abutments, and bruxism/TMJ appliances. Because it’s a wet milling process that sprays coolant while cutting, heat doesn’t build up in zirconia or glass ceramic, reducing micro-cracks and producing a smooth, well-finished margin between tooth and prosthetic.

Seongmo Dental Clinic 5-axis wet milling machine

5-axis wet milling machine core technology

The doctor designs it personally — the one who treats you also designs it+

The doctor who personally examined your occlusion, gum condition, and opposing tooth shape does the design directly. Without the step of explaining the desired shape to an outside lab through notes and models, the gap between the intended shape and the finished prosthetic narrows. If any adjustment is needed after a try-in, the design can be revised and remilled on the spot.

5-axis simultaneous machining — even undercuts and angled structures+

3-axis and 4-axis units have limited tool-approach directions, making it difficult to mill angled surfaces or undercut structures. A 5-axis unit tilts the material along multiple axes during machining, so it can handle complex cases such as custom implant abutments, prosthetics with an angled screw hole, or bridges connecting multiple teeth.

Wet machining — precise cutting without heat damage+

Heat generated during milling can leave micro-cracks in ceramic, shortening the prosthetic’s lifespan. Wet milling cools the material instantly by spraying coolant while cutting, and also washes away dust, leaving a smooth margin surface. A precise margin lowers the risk of secondary decay and micro-leakage.

A wide range of prosthetics fabricated in-house+

We select the right material for each case — zirconia, glass ceramic, hybrid ceramic, PMMA, wax, and more — to fabricate crowns, inlays, onlays, endocrowns, veneers, bridges, implant prosthetics, temporary prosthetics, and oral appliances. With fewer restrictions on material and shape, treatment plans can be tailored more closely to each patient’s condition.

Fully completed in-house — no more round trips to a lab+

Every step — Primescan scanning → design → 5-axis wet milling → SpeedFire sintering → seating — is handled in-house. For cases that meet the indications, the final prosthetic is seated the same day, without a long wait wearing a temporary crown.

The one who designs it also mills it, and the one who mills it also seats it.
Seongmo Dental Clinic in Seongbuk-gu takes responsibility for the entire prosthetic fabrication process in-house, with the 5-axis wet milling machine.

See details → 5-Axis Wet Milling Machine

Sungshin Women’s University Chairside 3D Printer Phrozen Sonic CS+

Advanced Medical Equipment — Phrozen Sonic CS+ Chairside 3D Printer

Instead of sending it to a lab, we print it right next to the treatment room

Phrozen Sonic CS+ chairside 3D printer used at Seongmo Dental Clinic

385nm UV-A LCD photopolymerization · XY 22μm precision, 50–100μm layer thickness · CURE+ post-curing means a single restoration takes just 15 minutes to print

Seongmo Dental Clinic introduced the Phrozen Sonic CS+ chairside 3D printer, handling scan → design → print → wash/cure → seating directly in the treatment room. Instead of sending the case to a lab and waiting days, we can fabricate temporary prosthetics, models, surgical guides, and more on the same day, dramatically shortening the treatment period.

It prints with precision using a 385nm UV-A light source, XY precision of 22μm, and a layer thickness of 50–100μm, then finishes the material properties with the CURE+ post-curing unit.

See details → Phrozen Sonic CS+ Chairside 3D Printer

Seongmo Dental Clinic advanced equipment — key facts

Open since 1998 — more than 25 years operating in Seongbuk-gu near Sungshin Women’s University
The only EMS Airflow full system in Seongbuk-gu (37°C warm water, PIEZON · PERIOFLOW · AIRFLOW)
Plazen plasma root canal treatment — found in about 400 clinics nationwide, at the standard national health insurance rate
Electric-motor handpieces — found in fewer than 5% of clinics in Korea, fitted on every chair
T-scan occlusal analysis — real-time occlusal force and timing measured down to 0.003 seconds
VITA Easyshade® V — spectrophotometric sensor quantifies tooth shade, reducing prosthetic remakes
5-axis wet milling machine — doctor-designed, in-house machining, fabricating bridges and custom implant abutments
In-house 3D printer Phrozen Sonic CS+ · Cure+ — in-house printing of temporary crowns, splints, and surgical guides

Seongmo Dental Clinic equipment comparison — typical clinics vs. Seongmo Dental Clinic

Area of care	Typical clinic	Seongmo Dental Clinic
Root canal sterilization	NaOCl chemical disinfection, 15+ min wait	Plazen plasma, ~1 min, same insurance rate
Impressions	Rubber impression material	Primescan 3D scanner, ~30 million KRW class
Scaling	Single ultrasonic unit	EMS Airflow 3-in-1 system, only in Seongbuk-gu
Anesthesia method	Standard infiltration injection	Quicksleeper + i-ject dual system, immediate effect
Occlusal analysis	Articulating paper (analog)	T-scan digital, real-time to 0.003 sec
Tooth shade measurement	Shade guide (visual)	VITA Easyshade® V, spectrophotometric data
Same-day prosthetics	External lab, 1–2 weeks	Primemill + SpeedFire, ~30–60 min in-house
Prosthetic fabrication	Outsourced to a dental lab	In-house 5-axis wet milling, doctor-designed, milled, and seated
Temporary crowns/appliances	Lab fabrication and shipping	In-house printing on the Phrozen Sonic CS+, including Cure+ post-curing
Botox injection	Manual, feel-based	i-JECT B digital dosing, 0.05cc automatic, minimal left–right variation

Advanced dental equipment near Sungshin Women’s University — frequently asked questions

Q. Is Plazen root canal treatment near Sungshin Women’s University more expensive?

Even though Seongmo Dental Clinic has introduced the Plazen device, costing roughly 38 million KRW, it applies the standard national health insurance root canal treatment fee with no additional cost. We offer this advanced system — found in only about 400 clinics nationwide — at the price of conventional root canal treatment.

Q. How is Plazen root canal treatment different from conventional root canal treatment?

Conventional root canal treatment relies on placing medication and waiting for disinfection, requiring 15 minutes or more per visit. Plazen uses reactive oxygen species (ROS) generated by a plasma discharge to sterilize even micro-crevices that a file cannot reach, in under a minute. The biggest differences are elimination of reinfection causes, minimized post-treatment pain, and fewer visits (same-day endo is possible).

Q. Can I get EMS powder scaling covered by national health insurance in Seongbuk-gu?

Seongmo Dental Clinic offers the EMS Prophylaxis Master full system (PIEZON · PERIOFLOW · AIRFLOW integrated) — the only one in Seongbuk-gu — at the standard national health insurance scaling/gum-treatment cost. There is no additional charge.

Q. Scaling scares me and makes my teeth sensitive. Is EMS really less painful?

The EMS Prophylaxis Master uses water warmed to about 37°C, close to body temperature, blocking the sensitive pain caused by cold water at the source. PIEZON technology responds strongly only to hard tartar and gently on clean tooth surfaces, minimizing unnecessary irritation.

Q. I’ve had a bad experience with anesthesia not working well. Can Quicksleeper help?

Quicksleeper is an intraosseous anesthesia device that injects anesthetic directly into the cancellous bone near the nerve, delivering reliable anesthesia even in difficult cases such as thick cortical bone or severe inflammation. Applied in stages together with i-ject, it fundamentally resolves the experience of anesthesia not working properly.

Q. When is T-scan occlusal analysis needed?

T-scan occlusal analysis is needed for occlusal adjustment after prosthetic treatment such as implants, crowns, or inlays; TMJ disorder treatment; diagnosing bruxism (grinding/clenching); and unexplained tooth pain or fracture. It precisely measures occlusal force and timing — down to 0.003 seconds — that articulating paper cannot capture.

Q. My prosthetic keeps breaking after my implant. Can T-scan help?

The most common cause of repeated prosthetic fracture is occlusal force concentrating on a specific tooth. T-scan shows numerically how much force is applied to which tooth, allowing precise adjustment of the overloaded point.

Q. My prosthetic looked like the wrong tooth color. Why does that happen?

The conventional method relies on the doctor visually comparing a shade guide, which can introduce error depending on lighting, condition, and moisture level. Seongmo Dental Clinic measures tooth shade numerically with the VITA Easyshade® V digital spectrophotometer and transmits it to the dental lab, minimizing shade error with reproducible, objective data.

Q. Can I know exactly how much brighter my teeth got after whitening?

With the VITA Easyshade® V, we quantify your tooth shade before and after whitening using the same standard for comparison. You can confirm “how many shades brighter” with data rather than a guess, helping you reasonably decide whether further whitening is needed.

Q. Is 3D CT really necessary before implant surgery near Sungshin Women’s University?

Seongmo Dental Clinic’s HDX Dentri 3D CT identifies bone thickness and nerve canal location to the millimeter, improving the safety and precision of implants, wisdom tooth extraction, and apicoectomy. Linked with our 3D printer surgical guides, it enables navigation surgery.

Q. Why is an electric-motor handpiece better than an air turbine?

An electric motor allows precise high-speed/low-speed control with less noise and vibration. It shortens the time to remove a zirconia prosthetic from over 10 minutes to under 1 minute. Found in fewer than 5% of clinics in Korea, Seongmo Dental Clinic has equipped every treatment chair with one.

Q. Can you make a same-day temporary crown or splint in-house?

Seongmo Dental Clinic uses data captured by the Primescan 3D scanner to immediately fabricate temporary crowns, TMJ splints, ARS appliances, and surgical guides on our in-house 3D printer. We complete them quickly, without outsourcing to an external lab.

Q. What does it mean that the doctor personally designs the prosthetic?

Seongmo Dental Clinic keeps a 5-axis wet milling machine in-house, with the treating doctor personally designing, machining, and seating the prosthetic. Without the step of describing the desired shape to an outside lab through words and models, it is made as intended, and if adjustment is needed after a try-in, it can be remilled and adjusted on the spot.

Q. How is a 5-axis milling machine different from a 3-axis or 4-axis machine?

3-axis and 4-axis units have limited tool-approach directions, making angled surfaces or undercuts difficult to mill. A 5-axis unit tilts the material in multiple directions while cutting, so it can fabricate complex shapes such as custom implant abutments, prosthetics with angled screw holes, and bridges connecting several teeth. Seongmo Dental Clinic adds wet machining with coolant on top of this, reducing heat damage and micro-cracks.

Q. What equipment do you use for in-house 3D printing?

We operate the Phrozen Sonic CS+ dental LCD photopolymer 3D printer together with the dedicated Cure+ post-curing unit. Using dental resin, we print temporary crowns, TMJ splints, custom denture impression trays, implant surgical guides, and diagnostic models, completing washing and post-curing entirely in-house.

Q. I stopped treatment at another clinic — can I continue it at Seongmo Dental Clinic?

Yes, that’s possible. Seongmo Dental Clinic also treats complex cases discontinued at other medical institutions. After precisely assessing your current condition with Q-ray fluorescence analysis, the Primescan 3D scanner, and HDX Dentri 3D CT, we establish a new treatment plan aligned with our natural-tooth-preservation guidelines.

Seongmo Dental Clinic equipment glossary

Plazen (Plazen RCT®): A root canal treatment adjunct device that sterilizes bacteria in the canal with plasma energy. Reaches micro-areas that conventional file methods cannot, in under 1 minute. Covered at the standard national health insurance root canal fee.
Primescan: Dentsply Sirona’s 3D intraoral scanner. Captures several million data points per second; a premium device costing roughly 30 million KRW. Replaces rubber impression material.
EMS Airflow: Switzerland’s EMS powder scaling integrated system. Combines PIEZON NO PAIN, PERIOFLOW, and AIRFLOW with 37°C warm water. The only full system in Seongbuk-gu.
Q-ray: A quantitative light-induced fluorescence analyzer. Shines a blue light harmless to the body, visualizing incipient cavities, secondary decay, cracks, and peri-implantitis in red fluorescence.
Quicksleeper: A computer-controlled intraosseous anesthesia device. Injects anesthetic directly into cancellous bone near the nerve. Effective for difficult cases, with immediate anesthetic effect.
i-ject: A computer-controlled painless anesthesia system. Applicable to periodontal ligament, infiltration, and block anesthesia. Blocks pressure-related pain at the source.
ACTILINK: A plasma surface-activation system. Activates the surface of implant fixtures, bone graft material, membranes, abutments, and prosthetics to a hydrophilic state, improving bond strength.
EXPlasma Z7: A low-temperature plasma sterilizer. 10-minute ultra-fast sterilization. Fully sterilizes heat-sensitive precision instruments without damage.

HDX Dentri: A low-dose 3D CT. Captures anatomical structures three-dimensionally before surgical procedures such as implants, wisdom tooth extraction, and apicoectomy.
Osstem Beautis Light: A high-power professional whitening lamp. A two-track system combining a stand type (up to 2,200mW/cm²) and a necklace type (600mW/cm²).
T-scan: A digital occlusal analysis system. Measures and visualizes occlusal force, timing, and per-tooth load in real time, down to 0.003-second increments. Used in prosthetic, implant, and TMJ treatment.
VITA Easyshade® V: A digital spectrophotometer. Quantifies tooth shade using both the VITA Classical and 3D-MASTER systems. Transmits before/after shade data to the dental lab for prosthetics, veneers, and whitening.
Primemill (Primemill): Dentsply Sirona’s chairside milling unit. A dual-spindle, four-motor parallel milling structure processes a zirconia crown in about 5 minutes in Superfast mode. Completes inlays, onlays, overlays, endocrowns, veneers, and implant prosthetics entirely in-house. See details →
SpeedFire: Dentsply Sirona’s ultra-fast chairside sintering furnace. Integrates sintering and glazing in a single unit. Sinters a single prosthetic in about 30 minutes. Shortens the temporary-crown period to virtually immediate. See details →
5-Axis Wet Milling Machine: An in-house machining unit that cuts prosthetic design data using five simultaneously controlled axes. Wet processing with coolant reduces heat damage and micro-cracks, and machines undercuts, angled structures, custom implant abutments, and bridges. At Seongmo Dental Clinic, the doctor personally designs, machines, and seats each prosthetic. See details →
Phrozen Sonic CS+: An in-house dental LCD photopolymer 3D printer. Together with the dedicated Cure+ post-curing unit, prints and finishes temporary crowns, TMJ splints, custom denture impression trays, surgical guides, and diagnostic models. See details →
i-JECT B: MediHub’s digital quantitative Botox injector. Automatic dosing in 0.05cc/0.1cc increments. LDS patented structure minimizes drug loss. Used for Botox treatment of bruxism, jaw-slimming (masseter), and the temporalis muscle.

Seongmo Dental Clinic Plazen root canal treatment process

1Precision diagnosis — identify canal shape and cracks with HDX Dentri 3D CT + Q-ray fluorescence analysis
2Painless anesthesia — Quicksleeper intraosseous anesthesia + i-ject, applied together. Treatment begins immediately after anesthesia
3Canal shaping — enlarging and shaping the canal with mechanical files
4Plazen sterilization — Plazen RCT® plasma discharge sterilizes even micro-areas in under 1 minute
5Canal irrigation and drying — complete removal of bacterial residue
6Canal filling — same-day filling (one-day endo) applied when indications are met
7Restoration planning — a crown or endocrown restoration plan is established based on the post-treatment condition

Seongmo Dental Clinic equipment introduction video

📽 Confirm the YouTube video ID and replace the code below

<iframe width="100%" height="400" src="https://www.youtube.com/embed/[YOUTUBE_VIDEO_ID]" title="Seongmo Dental Clinic advanced medical equipment introduction" frameborder="0" allowfullscreen></iframe>

References — authoritative medical sources

Health Insurance Review & Assessment Service (hira.or.kr)
Korean Dental Association (kda.or.kr)
Osstem Implant (osstem.co.kr)

Seongmo Dental Clinic equipment detail pages — all 20 items

Plasma Endo Plazen RCT®

Plasma Root Canal Treatment

Aqueous plasma in the canal · ~1 min disinfection · same national health insurance rate

Primescan

3D Intraoral Scanner

Millions of data points per second · replaces rubber impressions · enables same-day prosthetics

EMS Prophylaxis Master

Powder Scaling

Warm-water rinse · PERIOFLOW subgingival access · stain removal

Q-ray

Quantitative Fluorescence Diagnostics

Early & secondary decay · microscopic cracks · no radiation

Quicksleeper

Computer-Controlled Intraosseous Anesthesia

Direct cancellous bone injection · immediate effect · handles difficult cases

i-ject

Computer-Controlled Painless Anesthesia

Pressure-pain control · periodontal ligament anesthesia · minimal numbness

3D Printer

In-House 3D Printing

Temporary crowns · splints/ARS · implant surgical guides

ACTILINK

Plasma Surface Activation

Fixtures · bone graft material · abutments — hydrophilic activation

EXPlasma Z7

Low-Temperature Plasma Sterilization

10-minute sterilization · no heat damage · preserves precision instruments

HDX Dentri

3D CT Precision Diagnostics

Low-dose · nerve-canal avoidance · guided-surgery planning

Osstem Beautis Light

High-Intensity Whitening Lamp

Up to 2,200mW/cm² · 430–490nm · two-track system

Electric Motor

Electric-Motor System

Fitted on every chair · prosthetic removal under 1 minute · low noise

Dentis Luvis-S300

Surgical Light

Shadow-free cross illumination · CRI 95+ · low heat

T-scan

Digital Occlusal Analysis

0.003-second precision · quantified load · prosthetics & TMJ

VITA Easyshade® V

Digital Tooth Shade Measurement

Spectrophotometric · shade matching · before/after whitening comparison

CEREC Primemill

Primemill Chairside Milling

Superfast mode zirconia in ~5 min · Tessera block machining · endocrowns/overlays

Dentsply Sirona SpeedFire

SpeedFire Instant Sintering

Single prosthetic sintered in ~30 min · sintering + glazing combined · instantly shorter temporary period

MediHub i-JECT B

Digital Quantitative Botox Injection

0.05cc automatic dosing · minimal left–right variation · bruxism/jaw-slimming/temporalis Botox

5-Axis Wet Milling Machine W5

In-House 5-Axis Wet Milling

Doctor-designed, milled, and seated · undercuts/bridges/custom abutments · precise wet cutting

Phrozen Sonic CS+

Chairside 3D Printer

Chairside printing · 385nm UV-A · CURE+ post-curing · same-day completion · right next to the treatment room

Related care information

Results of any dental treatment may vary depending on each patient’s individual oral condition. Whether a given piece of equipment applies, and the treatment method, should be determined after a thorough consultation with your treating clinician following precise diagnosis.
This page was last updated with current information as of August 2026.